Kaydon KC100XP0 Four-Point Contact Bearings

L:749.3 mm; S:4.763 mm; ba:83.344 mm; Ca:107.798 mm; Cap bolt, SAE grade:8; P120°:207 kN; P90°:334 kN; Cap bolt:1 1/4-7 UNC; Eye bolt:2 x 1/2-13 UNC; Pa:58.7 kN;

Pa:33.8 kN; dc:76.2 mm; A1:88.9 mm; P150°:44.5 kN; P120°:49.8 kN; Da:140 mm; RG:3/8 NPT; R2:21.431 mm; db:92.075 mm; Cap bolt recommended tightening torque:298.3 N·m;

d3 max.:195.402 mm; Sleeve:S 130x5.3/16; Lock washer:W 30; Lock nut:AN 30; B4:28.575 mm; Mass adapter sleeve assembly:8.15 kg; d1:131.762 mm; B:24.867 mm; d:150 mm; Hydraulic nut:HMVC 30E;

d1:47 mm; B3:3 mm; B:13 mm; Mass lock nut:0.12 kg; h:2.5 mm; Grub (set) screw size:M6; d3:58 mm; Associated spanner:HN 8-9; G:M 40x1.5; Axial static load carrying capacity:62 kN;

Height T:1.4688 in; Weight W:0.57 lb; Insert Bearing IB:Stainless Steel; Basic Static Radial Load Rating Co:1470 lbf; Basic Dynamic Radial Load Rating:2380 lbf; Dimension DA:2.6875 in; Diameter N:0.5370 in; Dimension A2:0.5938 in; Dimension L:3.3750 in; Shaft Diameter D:3/4 in;

Accessories:One Seal; D:190.0000 mm; Oil Speed Rating n2:3800 rpm; Basic Static Radial Load Rating Co:104000 N; Oil Speed Rating Open/Shielded n2:3800 rpm; Grease Speed Rating n1:3200 rpm; Sealed Speed Rating n3:2200 rpm; Basic Dynamic Radial Load Rating C:133000 N; Grease Speed Rating Open/Shielded

Basic Static Radial Load Rating Co:23600 N; Sealed Speed Rating n3:5600 rpm; Grease Speed Rating Open/Shielded n1:8500 rpm; D:90.0000 mm; Accessories:Shield & Seal; Basic Dynamic Radial Load Rating C:43600 N; Oil Speed Rating Open/Shielded n2:10000 rpm; d:30.000 mm; B:23.00 mm; Fillet Radius ra:1.50

Basic Static Radial Load Rating Co:88000 N; Basic Dynamic Radial Load Rating C:78100 N; Grease Speed Rating n1:3800 rpm; D:110.0000 mm; Sealed Speed Rating n3:3800 rpm; Accessories:Two Shields & Snap-R; Fillet Radius ra:1.50 mm; B:36.50 mm; d:60.000 mm; Oil Speed Rating n2:5000 rpm;

Basic Static Radial Load Rating Co:53000 N; Oil Speed Rating Open/Shielded n2:5300 rpm; D:140.0000 mm; Sealed Speed Rating n3:3000 rpm; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:4500 rpm; B:26.00 mm; d:80.000 mm; Grease Speed Rating n1:4500 rpm; Oil Speed Rating n2:5300 rpm;

Ca:55.804 mm; P150°:40 kN; h:42.069 mm; da:88.9 mm; P90°:71.2 kN; PG:1/4 NPT; Cap bolt recommended tightening torque:203.4 N·m; ba:38.894 mm; RG:3/8 NPT; Bearing:1220 K;

d:320.000 mm; Basic Static Radial Load Rating Co:815000 N; B:71.00 mm; Basic Dynamic Radial Load Rating C:462000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:960 rpm; D:500.0000 mm; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:1600 rpm;

Pa:4.07 kN; Adapter sleeve assembly:SNW 10x1.3/4; Ca:50.8 mm; R1:42.862 mm; Cap bolt recommended tightening torque:149.1 N·m; A1:69.85 mm; P60°:39.1 kN; P150°:12.9 kN; Taconite seal:TER 21; RG:1/8 NPT;

Thread Diameter G:3/8-16; Weight W:0.30 kg; Dimension L:82.5 mm; Basic Dynamic Radial Load Rating C:14000 N; Dimension F:12.7 mm; Basic Static Radial Load Rating Co:7800 N; Width A:36.5 mm; Height H:74.6 mm; Dimension S1:19.8 mm; Insert Bearing IB:ZMaRC;

Sealed Speed Rating n3:4800 rpm; Basic Static Radial Load Rating Co:39000 N; Basic Dynamic Radial Load Rating C:48800 N; Grease Speed Rating n1:4800 rpm; d:50.000 mm; Fillet Radius ra:1.00 mm; B:30.20 mm; Oil Speed Rating n2:6300 rpm; D:90.0000 mm; Accessories:Two Shields & Snap-R;

P120°:21.8 kN; P150°:19.6 kN; Ca:57.785 mm; A1:88.9 mm; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt:2 x 5/8-11 UNC; Initial grease fill:87.885 g; Cap bolt, SAE grade:8; da:57.15 mm; H:167.481 mm;